Do you have an enquiry?

Give us a call for a friendly, knowlegable service.

01588 673 411

Find your Power Solution quickly and easily...


  • CE
  • RoHS
REOTRON MDW 700 WK image #1

A serial RS232, CANBUS, Device-Net, PROFIBUS-DP or EtherCat field bus interface can be used for remote adjustment. All unit settings can be made through the controller’s frontpanel, using a LED display and keypad.

Water cooling is provided on all units.

REOTRON MDW 700 -WK series, three-phase, microprocessor-based thyristor controllers are suitable for resistive or resistive/inductive loads, especially those with a high Rcold / Rwarm coefficient. Status relays indicate unit ready and fault conditions.

Depending on settings, the controller normally operates on the phase-angle principle (standard setting). It can also be used in a burst-fire mode. In the phase-angle mode the unit works as a regulator for RMS current, RMS voltage, or real power. The proportional regulation adjustment is variable. External setpoint signals can be used for controlling current, voltage and power or potentiometers may be used instead.


Enquire Now
Code Type Phase Supply Voltage (V) Output Voltage (V) Output Current (A) Protection (IP) Max Ambient Temp (C) Availability Data Sheet  
MDW 700 WK Water cooled thyristor power controller Three phase 3x0 3x0 3x0 20 0...+45 Upon Request Datasheet PDF Enquire Now

Technical Diagrams