REO high-current supplyies are used wherever DUTs, with several thousand amperes have to be tested,
particulary switching devices, fuses, cables, etc.
The test items are thermally heated and tested in long duration tests under nominal conditions.
Tests with defined overloaded curves can also be made.
Traditional voltage adjustments with variable transformers ensure that the input signal is passed through to the output as a clean sinus.
Thus, tests with any current value can be sinusoidally tested and reproduced at any time.
The control of the high-current supplyies is electronically performed with the result that an accuracy of < 0.5% is achieved.In addition, the control can be integrated into custemers laboratory networks via different BUS systems.
Applications
|
|
Version |
Single-phase Supply |
Input voltage |
230/400 V |
Output voltage |
0...10 V |
Output current AC |
0...30 kA |
Frequency |
50/60 Hz |
Design |
manual automatic PLC Network |
Protection rating |
up to IP 54 |
|
|
Version |
Three-phase Supply |
Input voltage |
3 x 400 V |
Output voltage |
3 x 0...10 V |
Output current AC |
3 x 0...30 kA AC |
Frequency |
50/60 Hz |
Design |
manual automatic PLC Network |
Protection rating |
up to IP 54 |