uk

DC-Chokes

DC-Chokes

REO air chokes for particularly high LINEARITY

Air chokes are used when a particularly high linearity is required. By its relatively simple structure, they are not only compact, but also very stable.

- No saturation effects

- High linearity L (i)

- Very good mechanical resistance

- No hysteresis

  • NTT UI114-50

    REO TSS choke with iron core

    NTT UI114-50

    As a passive inductive component in power supplies and in power electronics, the buck-converter choke is used for attenuating undesirable frequencies or for saving and storing energy.


    The term buck-converter choke indicates the complete ready-for-use unit containing the choke, air cooling, mounting and connections. The chokes are available with different cores, which enables individual selection depending on the requirement of the application. In addition to iron-based cores, chokes with cores of amorphous alloy are becoming more common, in the form of toroidal cores, cut strip-wound cores or special custom solutions.


    The use of amorphous materials offers an exceptional combination of high satur­ation flux density (1.56 T) and a high permeability. In addition to the high temperature class, further features of amorphous alloy include low hysteresis and eddy-current losses, suitability for the medium-frequency range (<20 kHz) and use for high powers up to 500 kVA.



    • Type of choke: Up/Buck converter choke with iron core

    • Voltage of the system: 500 – 1100 V

    • Max. permissible tolerances: ( -10 % / +10 % )

    • Linearity: min. 0.2 mH @ 230 Aeff

    • Harmonic currents constantly / Superimposed Harmonics: 60 Ass @ 19 kHz

    • Insulation class: H

    • Cooling: AF

    • Protaction rating: IP65/66

    • Rated voltage for insulation: 1200 Vdc

    • Test voltage: 3.5 kV (50 Hz, 60 s)



  • NTT AMCC 400

    REO TSS choke with amorphous core

    NTT AMCC 400

    As a passive inductive component in power supplies and in power electronics, the buck-converter choke is used for attenuating undesirable frequencies or for saving and storing energy.


    The term buck-converter choke indicates the complete ready-for-use unit containing the choke, air cooling, mounting and connections. The chokes are available with different cores, which enables individual selection depending on the requirement of the application. In addition to iron-based cores, chokes with cores of amorphous alloy are becoming more common, in the form of toroidal cores, cut strip-wound cores or special custom solutions.


    The use of amorphous materials offers an exceptional combination of high satur­ation flux density (1.56 T) and a high permeability. In addition to the high temperature class, further features of amorphous alloy include low hysteresis and eddy-current losses, suitability for the medium-frequency range (<20 kHz) and use for high powers up to 500 kVA.



    • Type of choke: Up/Buck converter choke with iron core

    • Voltage of the system: 500 – 1100 V

    • Max. permissible tolerances: ( -10 % / +10 % )

    • Linearity: min. 0.2 mH @ 230 Aeff

    • Harmonic currents constantly / Superimposed Harmonics: 60 Ass @ 19 kHz

    • Insulation class: H

    • Cooling: AF

    • Protaction rating: IP65/66

    • Rated voltage for insulation: 1200 Vdc

    • Test voltage: 3.5 kV (50 Hz, 60 s)



  1. Page:
  2. 1
  3. 2

Downloads

  • Download
    Drives Catalog
    pdf

    Drives Catalog

    IndustrialConverter Solutions - Drives
    Download
  • Download
    Air chokes catalogue
    pdf

    Air chokes catalogue

    Product catalogue REO air chokes
    Download
  • Download
    Operating instructions
    pdf

    Operating instructions

    Operating instructions - REO - Mains chokes, DC chokes Motor chokes, sine-wave filters, du/dt chokes
    Download