DC-Power supplies
REOTRON SMP - the variable DC power supply from REO
The REOTRON SMP switching power supply provides a safe, stable and adjustable power supply for use in process engineering systems and guarantees the highest level of quality.
The DC power supplies from the REOTRON SMP series are primary switched switching power supplies with galvanic isolation from the input to the output. The devices can be used as voltage, current or power regulators.
-
REOTRON SMP-ESM
19“ Plug-In module
- Output voltage: 25 - 600 V
- Output Current: 2 - 600 A
- Output power: 1000 - 15000 W
- Input voltage switchable: Eingangsspannung umschaltbar [V] V
The REOTRON SMP power supplies are primary switched power supplies with galvanic separation from the input to the output. They can be used as voltage, current or power regulators.
Operation
The unit can be operated from an internal display, external control signals of 0…+10V, 0(4)…20mA or optionally by a fieldbus interface such as DeviceNet, ProfiBus, CanBus, EtherCAT, EtherNet/IP and ProfiNet protocols.
Input devices
The device input is designed for connection to a three-phase mains 3 x 400 V, 50/60 Hz. The compliance of EMC standards is guaranteed by an input-sided PFC-mains filter.
Design
The devices have a compact design in a 19 inch rackmount chassis and can be delivered as a installation ready control cabinet version or as a tabletop unit (lab version). The devices are air- or water-cooled.
Connection
The SMP‘s are connected via screw terminals and with cooper terminal buses at high output currents. Like all REO-products, the REOTRON SMP‘s are also available as customized versions.
High range of performance
The units can be combined to power supplies with higher ratings by connecting the units in series or parallel. -
REOTRON SMP-ESH
- Output voltage: 10 - 80 V
- Output Current: 10 - 60 A
- Output power: 200 - 1400 W
- Input voltage switchable: Eingangsspannung umschaltbar [V] V
The REOTRON SMP power supplies are primary switched power supplies with galvanic separation from the input to the output. They can be used as voltage, current or power regulators.
Operation
The unit can be operated from an internal display, external control signals of 0…+10V, 0(4)…20mA or optionally by a fieldbus interface such as DeviceNet, ProfiBus, CanBus, EtherCAT, EtherNet/IP and ProfiNet protocols.
Input devices
The device input is designed for connection to a three-phase mains 3 x 400 V, 50/60 Hz. The compliance of EMC standards is guaranteed by an input-sided PFC-mains filter.
Design
The devices have a compact design in a 19 inch rackmount chassis and can be delivered as a installation ready control cabinet version or as a tabletop unit (lab version). The devices are air- or water-cooled.
Connection
The SMP‘s are connected via screw terminals and with cooper terminal buses at high output currents. Like all REO-products, the REOTRON SMP‘s are also available as customized versions.
High range of performance
The units can be combined to power supplies with higher ratings by connecting the units in series or parallel. -
REOTRON SMP-KMA
Installation on mounting wall
- Output voltage: 10 - 50 V
- Output Current: 2 - 7,5 A
- Output power: 20 - 200 W
- Input voltage switchable: Eingangsspannung umschaltbar [V] V
The REOTRON SMP power supplies are primary switched power supplies with galvanic separation from the input to the output. They can be used as voltage, current or power regulators.
Operation
The unit can be operated from an internal display, external control signals of 0…+10V, 0(4)…20mA or optionally by a fieldbus interface such as DeviceNet, ProfiBus, CanBus, EtherCAT, EtherNet/IP and ProfiNet protocols.
Input devices
The device input is designed for connection to a three-phase mains 3 x 400 V, 50/60 Hz. The compliance of EMC standards is guaranteed by an input-sided PFC-mains filter.
Design
The devices have a compact design in a 19 inch rackmount chassis and can be delivered as a installation ready control cabinet version or as a tabletop unit (lab version). The devices are air- or water-cooled.
Connection
The SMP‘s are connected via screw terminals and with cooper terminal buses at high output currents. Like all REO-products, the REOTRON SMP‘s are also available as customized versions.
High range of performance
The units can be combined to power supplies with higher ratings by connecting the units in series or parallel. -
REOTRON SMP-KMB
Installation on mounting wall
- Output voltage: 20 - 80 V
- Output Current: 10 - 50 A
- Output power: 200 - 1600 W
- Input voltage switchable: Eingangsspannung umschaltbar [V] V
The REOTRON SMP power supplies are primary switched power supplies with galvanic separation from the input to the output. They can be used as voltage, current or power regulators.
Operation
The unit can be operated from an internal display, external control signals of 0…+10V, 0(4)…20mA or optionally by a fieldbus interface such as DeviceNet, ProfiBus, CanBus, EtherCAT, EtherNet/IP and ProfiNet protocols.
Input devices
The device input is designed for connection to a three-phase mains 3 x 400 V, 50/60 Hz. The compliance of EMC standards is guaranteed by an input-sided PFC-mains filter.
Design
The devices have a compact design in a 19 inch rackmount chassis and can be delivered as a installation ready control cabinet version or as a tabletop unit (lab version). The devices are air- or water-cooled.
Connection
The SMP‘s are connected via screw terminals and with cooper terminal buses at high output currents. Like all REO-products, the REOTRON SMP‘s are also available as customized versions.
High range of performance
The units can be combined to power supplies with higher ratings by connecting the units in series or parallel. -
REOTRON SMP-SMB
Installation on mounting wall
- Output voltage: 25 - 600 V
- Output Current: 2 - 600 A
- Output power: 1000 - 15000 W
- Input voltage switchable: Eingangsspannung umschaltbar [V] V
The REOTRON SMP power supplies are primary switched power supplies with galvanic separation from the input to the output. They can be used as voltage, current or power regulators.
Operation
The unit can be operated from an internal display, external control signals of 0…+10V, 0(4)…20mA or optionally by a fieldbus interface such as DeviceNet, ProfiBus, CanBus, EtherCAT, EtherNet/IP and ProfiNet protocols.
Input devices
The device input is designed for connection to a three-phase mains 3 x 400 V, 50/60 Hz. The compliance of EMC standards is guaranteed by an input-sided PFC-mains filter.
Design
The devices have a compact design in a 19 inch rackmount chassis and can be delivered as a installation ready control cabinet version or as a tabletop unit (lab version). The devices are air- or water-cooled.
Connection
The SMP‘s are connected via screw terminals and with cooper terminal buses at high output currents. Like all REO-products, the REOTRON SMP‘s are also available as customized versions.
High range of performance
The units can be combined to power supplies with higher ratings by connecting the units in series or parallel. -
REOTRON SMP-LM
Benchtop
- Output voltage: 25 - 600 V
- Output Current: 2 - 600 A
- Output power: 1000 - 15000 W
The REOTRON SMP power supplies are primary switched power supplies with galvanic separation from the input to the output. They can be used as voltage, current or power regulators.
Operation
The unit can be operated from an internal display, external control signals of 0…+10V, 0(4)…20mA or optionally by a fieldbus interface such as DeviceNet, ProfiBus, CanBus, EtherCAT, EtherNet/IP and ProfiNet protocols.
Input devices
The device input is designed for connection to a three-phase mains 3 x 400 V, 50/60 Hz. The compliance of EMC standards is guaranteed by an input-sided PFC-mains filter.
Design
The devices have a compact design in a 19 inch rackmount chassis and can be delivered as a installation ready control cabinet version or as a tabletop unit (lab version). The devices are air- or water-cooled.
Connection
The SMP‘s are connected via screw terminals and with cooper terminal buses at high output currents. Like all REO-products, the REOTRON SMP‘s are also available as customized versions.
High range of performance
The units can be combined to power supplies with higher ratings by connecting the units in series or parallel.
