Vibratory Conveyor Technology

Download the Vibratory Conveyor Technology catalogue and see information about this and other products.


Certifications

Reovib Acceleration Sensors SW

IP 54, IP 65, die-cast aluminium

DESCRIPTION

Sensor for measuring accelerations in the range of 0… 35 g (frequency dependent). The sensor contains a piezoelectric acceleration element with a downstream amplifier. The accelerations are recorded by the piezo element and converted into a voltage proportional to the acceleration.

The amplifier converts the measurement signal into a form of 100/150/300/600/2000 mV / g. All components are housed in robust aluminium housing and completely encapsulated. The electrical connection is made using a 4-core (or 3-core) shielded cable. The shield must be grounded on the signal processing device.

ADVANTAGES

  • Aluminium casing
  • inexpensive versions available
  • Execution for difficult
  • Environmental conditions (optional)
  • lightweight
  • Plug + Play functionality with the
  • REOVIB MFS 168 + 268 control devices and the measuring devices REOVIB 6050 and REOVIB 6100

TECHNICAL SPECIFICATION


Suitable for this product


Reovib Ac Magnets

AC Magnets are intended for installation in vibrating conveyor systems that are used in material supply and conveying engineering technology....


Reovib Rts Phase Angle Controllers

The devices provide an increased level of adjustability for a variety of functions such as the soft-start setting, as well...